• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Conveyor Length: 60 ft / 18 m 30 cm

• Belt Width: 36 Inches / 900 mms

• Max Discharge Height: 27 ft 8 in / 8 m 44 cm

• Transport Weight: 19800 lbs / 9000 kgs

• Max Capacity: 5982 Cu Yd / 4574 m3

• Weight: 95,0191lbs

• Weight: 53,462lbs

• Weight: 73,800lbs

• Weight: 63,380lbs

• Weight: 76,500lbs

• Weight: 82,452lbs

• Weight: 74,550lbs

• Weight: 88,300lbs

• Transport Weight: 41,964lbs

• Weight: 40,350lbs

• Operating Weight: 45,745lbs

• Weight: 68,340lbs

• Operating Weight: 67,240lbs

• Weight: 68,340lbs

• Weight: 81,571lbs

• Weight: 106,000lbs

• Transport Weight: 112,700lbs

• Transport Weight: 88,670lbs

• Transport Weight: 73,524lbs

• Transport Weight: 113,935lbs

• Transport Weight: 95,769lbs

• Transport Weight: 142,903lbs

• Transport Weight: 110,782lbs

• Operating Weight: 64,595lbs

• Transport Weight: 52,250lbs / 23,600kg

• Operating Weight: 78,485lbs

• Operating Weight: 63,934lbs

• Operating Weight: 106,153lbs

• Transport Weight: 81,571lbs / 37,000kg

• Operating Weight: 159,394lbs / 72,300kg

• Operating Weight: 107,410lbs / 48,720kg

• Inlet Opening: 42" x 30"

• Operating Weight: 119,711lbs

• Inlet Opening: 35" x 24"

• Operating Weight: 61,730 lbs

• Inlet Opening: 42" x 30"

• Operating Weight: 113,096lbs

• Inlet Opening: 44" x 28"

• Operating Weight: 107,806lbs

• Inlet Opening: 40" x 24"

• Operating Weight: 77,930lbs

• Inlet Opening: 55” x 32"

• Operating Weight: 175,157lbs

The MicroGator® GT creates new possibilities for the controlled removal of large, resistant deposits in the pipeline. The rotating water-jet nozzle can be attached to your MicroGator® tractor, with an additional high-pressure water hose, to transform your cutting and grinding robot into an Ultra-High-Pressure water jetting system. The MicroGator® GT has infinitely adjustable working pressure from 9.000 to 37.000 PSI and 3 to 13 GPM (gallons per minute).

The CutterCam® provides a constant view of the operating area so you can see exactly what you are cutting/jetting. The MicroGator® GT has a large range of motion with a 400° Rotating elbow, full pan & tilt functionality, as well as 4th-Axis Articulation, giving operators ultimate control during operations.

There are a variety of different nozzle types available for purchase, including point blasting. Elevate the rehabilitation services you offer with this next-level upgrade to your MicroGator® system.

• Inspection Range Diameter: 6"(150mm) – 16"(400mm)

  
  

Don’t let its size fool you – IBAK’s compact cutter is small enough to fit in tight lines, but delivers the power that our MicroGator® product line is known for. The MicroGator® 150 was designed with versatility in mind, providing optional modular attachments to tackle any rehabilitation job. Simply attach your CR3 or CR4 attachment kits to transform your cutter system into a UHP jetter, top hat packer, etc.

Interchangeable wheelsets are included and allow the carrier to squeeze into 6″ pipes and up. Take your rehabilitation services to the next level with the MicroGator® 150.

• Inspection Range Diameter: 8"(200mm) – 32"(800mm)

IBAK has developed a new, affordable solution that is ideal for service providers seeking the benefits of having both a compact sewer cutting system, as well as a complete inspection system. Look no further than the IBAK MicroGator® Air, a pneumatic pipe rehabilitation tool designed with compatibility and convenience in mind. Equipped with a pneumatic motor and manufactured to IBAK’s exacting quality standards, the MicroGator® Air is a practical, yet reliable solution. One feature that makes this cutter unique is its focus on modularity.

The MicroGator® Air is compatible with the components to our MainLite Systems including the KW 207 and KW 307 cable reels, our BP 3 and BS10 control units, and even the same cable. With these components, all you need is a hose reel for the air hose and a compressor to have a complete cutting system.

The MicroGator® Air shares many of the same features as the MicroGator® 2.0, such as fourth-axis articulation, which allows the user ultimate control during advanced cutting operations. The IBAK CutterCam is compatible with the MicroGator® Air and provides the best possible view of the cutting area.

Even if it gets dirty, our unique air-curtain technology and remote wiper system will keep your camera lens clean with the push of a button. See how you can add lateral rehabilitation to your workflow by adding a MicroGator® Air to your existing system!

• Inspection Range Diameter: 8"(200mm) – 32"(800mm)

Upgrade your lateral reinstatement cutter system with the powerful MicroGator 2.0.  IBAK’s single-point electric rehabilitation cutter boasts longer cable lengths, quiet and efficient cutting motors, and a rugged drive unit designed for tough jobs. 

The durable chassis deploys high-powered cutting motors, while the main body expands to help center the tool accurately. 

The MicroGator 2.0 features the option for 4^th-Axis articulation, allowing forward cuts with ultimate control.  You can even make 360° cuts!  With the IBAK CutterCam®, operators always have an incredible view of the work area, ensuring easy operation every time.  If you’re looking for IBAK’s level of reliability and attention to detail in your CIPP reinstatement cutter, look no further than the MicroGator 2.0.

See the MicroGator® 2.0 in Action:

🎦 Cutting PVC in Real Time

🎦 Finding & Cutting Missed Tap

🎦 Cutting Protruding Taps & Roots

🎦 Cutting Out A Liner

🎦 Cutting A Lateral

This attachment allows you to turn your LISY lateral launch system into a lateral cleaning unit. The PHOBOS nozzle propels the pushrod up into the lateral from the LISY unit, cleaning while it goes. The nozzle not only cleans, but increases the distance possible by providing more thrust. The lateral cleaning attachment is quick and easy to install, and can be used in conjunction with the large diameter kits to clean laterals in larger pipelines. If you are a contractor, you can use this accessory to add a unique service to your offering. If you are a municipality who is responsible for the laterals in your community, why not clean them as you inspect?

Operators who protect their equipment with the use of Downhole Rollers will see an increase in production and an overall reduction of repairs and maintenance costs. Rollers protect the cable from cuts, reduce friction, wick water off the cable and increase the distance your system can travel down the pipeline. You wouldn’t buy a high performance car then put cheap tires on it, would you? Of course not! Protect your investment with a set of downhole rollers.

Protect your equipment from damage by making sure you have both hands available when lowering the inspection system into the manhole. This durable foot control plugs directly into KW 305

If you occasionally have to set up off the road or any distance from the inspection vehicle, you simply must have an upper deflection pulley. This pulley converts the lateral force exerted onto the cable, turning into vertical force which allows your synchronized KW 305 or KW 505 to operate effectively. This simple attachment protects the cable, reduces the strain on the entire system, and helps you travel greater distances in the pipeline!

Manned-entry inspections are challenging, but occasionally necessary. The Manned-Entry Adapter allows you to conduct these inspections quickly and safely using your existing inspection system components and your ORPHEUS 2 camera. The Manned-Entry Adapter includes a transport case, carrying strap, and a headset for communication back to the inspection vehicle. The camera cable serves as an added tether to increase safety, while the ORPHEUS camera is equipped with bright enough LED lighting to illuminate 120″ (3050mm) diameter pipe.

The rolling skid for ORION and NANO cameras centers and protects the camera during push operations. The roller system reduces friction and increases push distance in 6″ (150mm) pipes.

Most of our systems are synchronized to make sure that you do not back over your cable while retrieving, but occasionally it is helpful to have a rear-facing view when returning to the manhole. The RETRUS HD automatically changes your view in full digital HD resolution when the system is reversed allowing you to avoid dangers on the return trip.

This unique sensor attaches to the rear of the tractor and allows the user to measure the temperature at the sensor remotely. The sensor can be used to discover the presence of inflow since groundwater is cooler than the effluent in the pipeline.

The T66 attachment increases the unit’s height and weight, turning the incredibly small, yet powerful T66 tractor into a system capable of inspecting 12″ (300mm) pipelines and larger.

This large diameter attachment adds considerable height and weight to the system making sure you are up out of the water while maintaining a low center of gravity. The large attachment includes additional weight which hangs below the carriage. Compatible with T76 tractor.

With embedded tungsten carbide shards that are almost as hard as diamonds, these heavy, specialized wheels provide incredible traction in nearly any pipe. These wheels power their way through debris, finding traction through grease or scramble over rocks and offset joints.

Available in two different composites, these wheels are perfect for climbing over rocks and debris. Profiled to maximize pipeline contact area, these high performance wheels provide extra grip in loose gravel and give you an edge when climbing up offset pipeline joints. Available in hard (black) or softer (brown) composites for any application.

Formulated specifically for PVC pipelines, these wheels work well in all slippery pipes. Designed to avoid damaging the pipe wall, they utilize a granulated rubber composite which improves traction without cutting into the pipe surface. Over time they will wear, and become even more effective. If you are a contractor or city who inspects new PVC or pipe with FOG (Fats, Oils, & Grease) then you need a set of our granulated rubber wheels.

These air-filled tires are great all-purpose tires for use in larger diameter pipes. Use them to climb over obstacles and power through silt and debris. Pneumatic tires are available in multiple sizes for all of our tractors. If you inspect large diameter pipeline, you cannot afford to overlook these wheels.

If you work in oval pipe – this accessory is a must! The outriggers help keep the tractor in the center of the pipeline and prevent tip overs which can damage equipment. These systems are available for the T76 and PANORAMO Systems. They also work when used with the LISY Lateral Lauch attachment.

If you work in large partially-filled sanitary lines, the ARGO Camera Raft is the perfect accessory for you. Designed specifically for your RapidView IBAK system and formed out of high-strength ABS plastic, the ARGO keeps you above water and protects the camera system. There are two camera mounts to choose from. You can use a mounting bracket which accepts a standard KKD Adapter or a larger mount which accepts the standard Camera Base Mount from a T76 allowing you to use a light ring.

The electric remote lift for T66 allows operators to adjust the height of their inspection camera directly from the control unit! The lift kit is easy to install and mounts on the the T66 just like our other camera base modules. Pair the remote lift with the T66 Height Attachment to go from small diameter to large diameter with one system! Available in both SD and HD versions. Expand your range of applications by adding an electric remote lift to your T66 inspection system!

Expand your range of applications with one lift kit for all of your IBAK systems. The Universal Lift Kit is compatible with our MicroGator® rehabilitation systems (excluding MicroGator® 150) as well as our T76 camera tractor for pipe inspection. Add height to keep you above water while increasing weight for additional traction and longer pulling distances.

The BS 10 was developed for vehicle mounted installations of the compact KW 207 and KW 307 cable drums. These drums contain the power supply requirements of the down-hole equipment, and therefore the controller itself can be slimmer, lighter, and hidden from view. This controller includes an interface cable between the drum and the required computer. The desk component of the BS 10 is a keyboard surround with ergonomic joysticks, power on/off, microphone and 6 quick-keys for present controls.

The BS 7 – 10 X is the standard fiber optic mainline control unit, supporting High Definition cables and 4K optic scanning systems. Diagnostics and system control interface is displayed on a separate 10″ touchscreen, while your camera and tractor movements, focus, iris, cruise control, and lateral launch commands are controlled from the dual, multi-axis joysticks. This control unit also includes full integration of IBAK SoftControl for increased compatibility with 3rd party software suppliers. With a new ergonomic design and an integrated microphone & emergency stop, the BS 7 – 10 X is a great option for PANORAMO® 4K and HD systems.

The BS 3.5 – 10 X control unit is the standard in ergonomic controller design. The remote-control board acts as your diagnostic and control interface. All system functions are easily accessed by this small desktop unit. System information is displayed on a color LCD touchscreen while camera and tractor movements, focus, iris, cruise control and lateral launch commands are controlled from the dual, multi-axis joysticks making mainline inspections a breeze.

The portable BP 3 control unit is designed to be easy to use, economical, and compatible with many different IBAK systems, including the MainLite® HD compact cable reels, MiniLite® 3 HD Push Systems, and the MicroGator® Air. The controller features a large 12″ Windows PC touch screen with IKAS Recorder software pre-installed. It can be mounted in a vehicle or on a mobile rack for off-road inspections. The BP 3 control unit also features Bluetooth wireless connection, Wi-Fi Signal, and USB connections for exporting.

The KW505 has all the same great features of the KW 305 and accepts up to 1656 feet (505m) of high-strength fiber-optic cable. The KW 505 allows longer distance inspections and has the capability of transmitting the data from PANORAMO® 4K 360º Pipeline Scanners as well as any of our digital HD resolution camera heads.

Highlighted Features:🎦 Fully Synchronized Cable Retraction/Payout

The KW 305/310 is our most popular reel for use in mainline and lateral launch inspections.

• Capacity: up to 1000 feet (300m) of high-strength cable.

  
  

Features include:

• adjustable boom and optional work light,

• integrated power winch for lowering and retrieving equipment,

• automatic level-wind,

• fully synchronized cable management,

• a remote control pendant for tractor and lateral launch functions,

• the 310 supports Fiber Optic cables for digital HD video resolution.

Highlighted Features:

🎦 Fully Synchronized Cable Retraction/Payout

The KW 307 is the sibling of the KW 207 compact cable reel. Sharing the same core features, the KW 307 is larger to accommodate up to 1000′ linear feet of cable. Whether mounted in a vehicle, ATV, or trailer, this drum is a compact, economical option for most mainline inspections that are compatible with the BP 3 Controller.

The KW 207 reel was designed to be compact, powerful and easy to maintain. This design is based on decades of manufacturing expertise and real world project requirements. This drum includes an automatic level wind, powerful retrieval motor, rear tractor/winch controls and an emergency stop switch.

• Inspection Range Diameter: 6"(150mm) – 60"(1500mm)

Key Features:

• Zero Radius Steering 

• Automatic Tilt Compensation (ATC) 

• Dual-Axis Pivoting Connection 

• 1640’ (500m) Cable Length 

• Optional Tractor Extension Kit 

• Optional Sonde Location Transmitter 

• Compatible with LISY Lateral Launch Attachment 

• Available for HD 

  
  

Highlighted Features:

🎦 Internal Strain Relief

🎦 Air Pressurization/Regulation

🎦 Automatic Tilt Compensation (ATC)

HD Support Available: contact a member of the sales team for more information!

• Inspection Range Diameter: 4"(100mm) – 30"(750mm)

Key Features:

• Zero Radius Steering 

• Automatic Tilt Compensation (ATC) 

• Dual-Axis Pivoting Connection 

• 1000’ (300m) Cable Length 

• Optional Elevator Attachment 

• Available for HD 

  
  

Highlighted Features:

🎦 Internal Strain Relief

🎦 Air Pressurization/Regulation

🎦 Automatic Tilt Compensation (ATC)

HD Support Available: contact a member of the sales team for more information!

• Inspection Range Diameter: 3"(75mm) – 12"(305mm)

Key Features:

• Lateral Launch Capability 

• 6 white Power-LEDs 

• Self-leveling Upright Picture Control 

• Integrated Sonde Location Transmitter in Pushrod Cable 

• Inspection Range Diameter: 8"(200mm) – 120"3050mm)

Key Features:

• Full Digital HD Resolution (1920 x 1080p) 

• 10x Optical Zoom / 16x Digital Zoom 

• 8 white Power-LEDs, 6 white 5 mm LEDs for illuminating joint gaps 

• Automatic Lighting Control System eliminates excess image noise 

• ROTAX® Always Upright Image Correction 

• Built-in laser for deformation & diameter measurements 

• One-push Autofocus provides sharp image on command 

• Panning Range +/- 120° 

• Optional 3D GeoSense Pipeline & Lateral Mapping Sensor 

• Inspection Range Diameter: 3"(75mm) – 24"(610mm)

Key Features:

• Pushrod Capability and designed for Lateral Navigation  

• 4 white Power-LEDs 

• Auto-Upright Image Control 

• Built-in laser for deformation & diameter measurements 

• Panning Range +/- 120° / Viewing Range +/- 150° 

• Integrated Sonde Location Transmitter 

• Optional 3D GeoSense Pipeline & Lateral Mapping Sensor 

Related Videos:

🎦 Air Pressurization/Regulation