top of page
  • Instagram
  • Facebook
  • X
  • LinkedIn
  • Youtube

Getting the most out of your Trackless MT means putting it to work year-round. The spring and summer months offer an excellent opportunity to keep your MT productive by adding a Rotary Finishing Mower to your attachment portfolio. Our rotary mowers are ideally suited for grounds maintenance, parks, right-of-way mowing, municipal jobs or any other wide area green space. Since our rotary mowers mount to the front of the tractor, the MT’s articulated steering gives the operator precise control in close trimming conditions providing superior visibility, safety and productivity. The hydrostatic transmission allows the ground speed to be adjusted easily to match mowing conditions. The operator may also activate the hydrostatic lock, which functions the same as cruise control, except it does not compensate when going up or down a hill.


6′ Rotary Mower

The Trackless 6′ Rotary Finishing Mower is designed for close trimming on both sides with a full-width rear discharge. Four large gauge wheels and a flexible attaching frame allow accurate cutting on rolling ground. Due to the MT7’s hydrostatic transmission, the operator can maintain the maximum speed of cutting in various cutting conditions by simply easing up on the foot pedal in heavier grass or depressing the pedal further for a faster ground speed where the grass is shorter. The articulated steering gives the operator precise control for trimming.


10′ and 14′ Rotary Mowers

The 10′ and 14′ Rotary Finishing Mower was designed to drastically cut down mowing time on large areas such as campuses and parks. Uneven terrain requires flexibility in mowers to avoid scalping. Trackless solved this problem with a three-section, front-mounted mower comprised of a 72-inch three-spindle, PTO-driven center section with a hinged hydraulic-driven wing on each side. Separate valves control each hydraulic motor and lift cylinder. The MT7 has a built-in hydraulic system to power the right and left wings. Safety switches shut off the wings automatically when raised. For side slope cutting, axle extensions and terra grip turf tires are available.

Mowing

Rotary Finishing Mowers

Rotary Finishing Mower

Deck: 72" (1828mm) x 3/16" plate, rear discharge

Spindles: 3 -7 x Timken bearings, greaseable

Blades: 3 -7 x 25" x 2½" x 1/4" high lift

Casters: 4 - 10 swivel with 4" x 10" pneumatic tires

Drive: PTO to right angle gear box, 2 V-belts

Cutting Heights: 1 ½" to 4" in ½" increments

Cutting Tip Speed: 18,500 f.p.m. @ 2,200 engine r.p.m.

Wings: 24" (609mm) or 48" (1219mm)

Caster: 1 x 4" x 10" pneumatic on 24" wing; 3 on 48" wing

Roller: 1 gauge on 24" wing only

Lift Cylinder: Hydraulic x 2" x 8"

Rotor Speed @ 540 PTO: 1,780 rpm

Hinge: Compound - 110º ARC


Progressive Turf Mower

Deck: Main deck is PTO driven, each wing is hydraulic driven

Deck Construction: 3/16" steel plate deck construction

Cutting Height: 1 ½" to 5"

Wings: Automatic hydraulic shut-off valves when wings are lifted

Cutting Blades: 7

Wheels: solid urethane and puncture proof

Rollers: 2 anti-scalp rollers on centre deck


The Ultimate Mowing Tool: 14' Wide Lawn Mower at the Airport

bottom of page